What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?
10.06.2025 03:31
This is 'the assistant's answer'
the problem then depends on "how fast does the fuse operate?".
2024–10–10[John johnson John Johnson ]
YieldMax® ETFs Announces Distributions on XYZY, WNTR, SMCY, AIYY, MSTY, and Others - GlobeNewswire
But… the neutral is now “floating” because of the 1 ohm resistance.
The MOV will conduct when the voltage exceeds 50% of line voltage.
a photo is worth a thousand words.
Horoscope for Saturday, June 07, 2025 - Chicago Sun-Times
I post the exact comment here.
OK, this is Mohan Rajaratnam’s definition of a Surge suppressor.
At one ohm, the resistor has a maximum of 1 watt power.
An AC voltage/ current source, and an ac inductive load.
[image of Common-mode choke]
This is an electronic circuit designed to clamp voltages so that the Voltage Potential that appears at the outlet is never going to exceed the nominal value.
(Dc diagram shown, AC is similar).
One
This is the picture of an electronic coil of wire wound around a core of magnetic material.
Mohan forgets that a fuse is a one-time device, and needs to be replaced if it is tripped.
First Sentence:
Fuses, on their own, then operate much slower than the MOV variable resistance, during the lightning strike.
When the current is 200% of the rated value , it will “go open” (the link metal melts) and protect the device.
So combined with a device called a MOV or Metal-oxide-resistor, then forms the 3rd part of a “surge suppressor “.
“ A surge suppressor is the one which is connected at the input supply so that when there is a sudden change voltage it bypasses thereby protecting the (circuit) and electronic components”
Fred Espenak, astronomy's 'Mr. Eclipse', dies at 71 - Space
so, the loop of wire then, when put together with another loop reduces the ‘noise’ on a power line.
But it can get overloaded, and no longer works.
This is where the MOV conducts again, and dissipated the energy.
When the sun dies, could life survive on the Jupiter ocean moon Europa? - Space
“ … to protect building, lightning arrestor, is provided above building and directly connected to earth.”
He then asserts :
A circuit breaker is similar, but is resettable.
What is your review of working in EY?
The bolt then partially travels down the line to your home.
It also is a device that limits the change in current flow.
What does a fuse do?
10-year Treasury yield rises ahead of key jobs report - CNBC
So, the voltage could go up to 500 volts, and the fuse will not open up.
Here is a simplified AC power diagram.
P = e* I, so since I is 16 amps, then the voltage dropped is 1/16 volt or 0.0650 volts.
But during the surge, the fuse will not blow if it is a longer duration and lower value )10 to 50%).
This one hit behind the barn.
2024–10–11 [Bobby Sanchez Bobby Sanchez ].
Because the load is inductive, the current lags the voltage.(by a bit).
Now when you have a certain ac resistance, then a current flows in a loop.
One is “what exactly is in a ‘surge protector’ ? ”
These devices are installed between the “hot” and “neutral” and protective ground.
It’s been three xxx five werks, and there has been no response to my follow on query on his Commment to my answer.
Once the voltage goes over 0.0650 volts, then this fact can be used to amplify the difference, and turn the circuit breaker off , furthur down the line. Essentially that is what a RCD/GFCI does, it compares the incoming current, to the outgoing current, and if the difference between the two currents is over 5mA, then it trips the circuit breaker.
He then describes the function of a fuse.
There is no harm in having the surge suppressor along with the fuse in the circuit. The fuse will not open up until the current melts the link. This will take time, and in the interim, that jolt will get transmitted into the power supplies.
Edit 2024–10.
“ A fuse is a device which protects the (circuit) against overload and short circuit.”
Is the question then , "why buy a surge supressor, if the fuse alone protects the electronic circuits from a lightning bolt?".
Lightning arrestor is a spark-gap device, and can be installed anywhere. What is important, is that the wire is thick enough to withstand the lightning bolt and conduct the energy away from the building.
so, what happens?
There are two important concepts here.
but I think this circuit , shows a few more pieces.
This is a photo where a lightning bolt took out a home's complete mains distribution box, and a lot of electronic gear as well.
What is lightning?
This device then solves the entire problem.
A fuse is a non-resetable over current circuit protector.
The other is “what does a “fuse” do?”
He then describes Rainy Season and Lightning.
There are three different concepts here that are getting confused.
Would individual surge supressors have save this equipment? most likely, since the surge supressor would take the jolt instead of the electronic components.
The third is lightning and “how it gets conducted into a home.”
Can the fuse protect the electronic devices from lightning instead of a surge protector.
2024–10–14 [Omar Gharbi Omar Gharbi ]
These are simplified answers to the original question, and does not change anything I wrote above.
2024–10–11 [Victor Olarewsju Victor Olarewaju ]
Barnstars:
In schematic diagrams this is the symbol for a fuse:
(There is no concept of polarity, in the loop because the current changes direction 100 to 120 times a second (power frequency).
This is where this question deviates from being a 'generic' question, and becomes more specific.
2024–10–16 [ OO OLAOYE OYEBODE ]
Upvotes:
For this case there are devices called Metal oxide varistors (MOV).
At the secondary, it is 1000 times less.)turns ratio). If it gets hit with a 100,000 volt bolt of lightning then the voltage arrestors conduct and clamp the voltage down to line voltage, ( but a small amount leaks down the line). This is the problem.
At least they know the answer if they wanted it.
but this device (an Inductor) … impedes the rapid changes in the current.
what exactly is a ‘surge’ protector?
So, it’s possible that these devices from Trip Lite have addition suppression devices, these ones seem to be sturdy.
If the nominal power is 4,000 watts then the current at 230volts is 16 amps.
[old diagram got deleted by accident]
eight
2024–10–00 [ Ammar Mahdi ] Ammar Mahdi
And this is the problem alone. Is the power supply in the equipmemt designed with a lightning strike in mind? Some yes, others, no.
This is a high voltage low current spike that comes down the line because of the power poles being struck, and the voltage suppressors activating on the primary side of the transformer.
2024–09–27 [ Mohan Rajaratnam Mohan Rajaratnam ] . Thinks you can get free electricity from nothing : Mohan Rajaratnam's answer to Is it possible to generate free electricity at home using a magnet or other low-cost methods? If so, how does it work?
nine
It seems Mohan does not understand the difference between a comment and an Answer.